Everything that you would need use it is included in the kit. The instructions are detailed and easy understand and follow. The unit is well built with the bridge made if metal instead of plastic like some other kits I looked at. So far has saved me almost $1000 in being able to fix some dents picked up in parking lots on both of my vehicles.

I was hesitant to buy this, the rear quarter panel of my car had quite a few of little dents, from people open their car doors and bump to it, it works much better than I have hope for.

Like most of you - I read all the reviews and comments on this product before purchase. My wife and I had two small door ding dents. One on each car. They were unnoticeable to others but I could see them and they drove me crazy. I was skeptical despite the positive reviews because the dents were small. To my surprise, in one try on my wife’s car and two tries on mine - it worked like a charm! I hope to never get more small (or larger) dents in the future, but am happy with my purchase! A+

Purchased to repair two door dings and I used the black or less viscous glue. It pops off pretty quickly and I had to do it several time, but I did not want the dents to be pulled out too far.

I used the kit to move a small dent that a parked car made by opening it's door into the side of my car. Since the dent was small I only used the smallest gaskets. I did many applications, while sipping my morning coffee. After a few trials the dent virtually disappeared. Maybe there was a learning curve, but in the end, I couldn't be happier. The small spray bottle came in handy. I used 70% isopropyl (rubbing) alcohol which I got from a drug store to remove the glue residues. Worked like a charm.

I got these to pull some small dings and dents on my 30 year old VW van. Worked super!!! It pulled out everything I used it on. Some of the small dents are not perfect but if you didn't know that they were there, you'd never see them. Super happy and my van looks so much better and is super happy too!!!

I purchased this item to try and pull dents from a stainless steel refrigerator door. It worked great but maybe a little too well. I would suggest starting with the weakest glue and putting only a small amount on as the dent pulled a lot easier than the YouTube videos showed. I actually pulled a couple of "peaks" before I figured out the right amount of glue and technique. Worked perfectly after that. I even pulled two door dings from my vehicle (one small one large) and you can't even tell they were ever there. I did have a bit of trouble getting some of the glue off of the car and didn't want to scrub too hard but I figure I'll come off next time I have it cleaned and waxed. Alcohol worked on the refrigerator but the car paint was a bit more stubborn.

Arrived on time. Good product with all the parts needed. It worked very well on one small dent but the really deep door ding did not come out. I will try again later on that one. It works as advertised though.

Got a new truck after 96 days of dealing with issues on the truck. After delivery I noticed a small depression about the size of a nickle with a north south very minimal crease effect. I did not want to bring it back to the dealer, so I figured I would make a small investment of cash and time to learn to do it myself, so that other dings in other things that might come along, I could fix easily as DIY guy. No instructions come with the product, though there are many videos up on YouTube to quickly get the gist of how to do it. I looked at 2 or 3 post order and was ready to go. I used the smallest oval in the bridge set, and the yellow glue stick. It comes with both black and yellow but no instruction on which one to use when. I had viewed a video where the black was used and the DIY owner there had a hard time getting the glue off of his hood, so I selected the yellow which I assume has a lower viscosity. Set the bridge in place once the glue had say 10 minutes of air time dry. Slowly cranked down on the adjusting screw on the bridge, then walked away, came back a few minutes later, another turn or two and again walked away and then heard the "pop" of the glue attached to the smallest oval pull away along with the bridge falling to the floor. Wow, easy and relatively quick. After try 1 I still could see a very very small remnant of the depression, so I did the application one last time with the same small oval and BLAM the depression is now gone. The glue came off of the truck with the "pop" still attached to the small oval, and was easy to peel off therefrom. Nice product, low cost and works well.

It works well, I would just add that you need to have patience and repeat the process for some dents multiple times. I had a ding/dent on the rear quarter panel of my truck. It was in an area where the metal was thicker (towards the top of the truck bed). After 5 applications/repeats of the process I was able to get it down to about 25% of what it originally was. I can probably remove it further and will do in another session.